Table of Contents
Advertisement
1-3. About "Monitor" screen
"Monitor" screen shows several statuses such as the operat-
ing status of the air conditioner, function setting, or other cur-
rent operating conditions.
(1)
Monitor
(2)
Mode
Set temp.
26
Cool
Icon check:
Menu
(5)
(1) Screen status and current conditions
Shows the current screen name, room temperature, day
of the week, and clock.
NOTES:
•
The clock can be changed to 24-hour clock, AM/PM
(12-hour: 12:00–11:59 or 0:00–11:59) clock. (Refer
to "5-2-4. Change display format setting" on
page 18.)
•
Room temperature indication is available only if the
"Room temp. display" function is enabled. (Refer to
"5-6. Room temp. display setting" on page 21.)
(2) Icon display
Shows the function that is currently working or set.
NOTE: In this section, all the possible icons are dis-
played for description.
Icon
-
Economy
Set temp. (temperature) auto
return
Set temp. (temperature) range
limitation
On timer
Off timer
Auto-off timer
Weekly timer
R.C. (Remote Controller) sensor
-
control
Automatic defrosting, oil
-
recovery, or mode mismatch
Filter cleaning notification
R.C. (Remote Controller)
-
prohibition
White icon on a black background:
Indicates that the function is valid and performing the
function or standby state.
Black icon on a white background:
Indicates that the controller is in non-operating state be-
cause R.C. prohibition on the primary unit is working, or
timer has been set, though the function is valid.
Room 28˚
Mo 10:00
C
Fan
(3)
° C
High
(4)
See
Function name
page
About "Icon check" function:
In "Monitor" screen, you can check the name of the icon
that indicates function currently set.
NOTE: This function is only available when at least 1 icon
is displayed on the icon display.
•
Message balloon with the function name appears when
you press the [Enter button] and select the icon by using
the [Cursor button].
•
Item that has a timer function, remaining time until the
timer expires is also displayed.
Monitor
Off timer: Remaining 1.0 hour
Cool
Menu
•
If multiple timers have been set, up/down arrows
displayed in the message balloon. To check the target
timer function, press the [Cursor button (Up/Down)].
Off timer: Remaining 1.0 hour
•
With pressing the [Cursor button (Left/Right)], you can
check the other icon functions when several icons are
displayed on the "Monitor" screen.
•
When you press the [Enter button] again, the message
balloon is closed.
•
If there is no additional button operation for 3 seconds,
the icon check function is finished.
(3) Operating condition display
Shows the operating mode, set temperature, and fan
9
speed that are currently working or set.
9
•
Mode display: Operating mode is displayed.
•
Set temp. display: Set temperature is displayed.
10
•
Fan display: Fan speed is displayed.
(4) Operation guidance display
11
Shows the current operable items and the button to be
pressed.
12
(5) Screen switch guidance display
Any combination of [Menu button] mark (
15
of switchable screen by pressing the [Menu button] or
[Screen switch button (Left/Right)] mark (
13
with name of switchable screen by pressing the [Screen
switch button (Left/Right)] is displayed.
21
24
20
-
Mo 10:00
26
° C
High
End:
) with name
are
or
)
En-4
Hide quick links:
Advertisement
Table of Contents
