HYDRAULIC ATTACHMENT SYSTEM
WHISK BROOM ANGLE FRAME
Removal and Installation
1
2297
Figure 19-81 Remove Whisk Broom Pivot Bushings
1.
Remove the two bushings (1) (Figure 19-81, Page 19-39) from both sides of the angle frame.
2.
Apply LOCTITE 271 (Red) to the bushing before installing them into the angle frame.
3.
Install the two bushings (1) (Figure 19-82, Page 19-39) on both sides of the angle frame.
2298
Figure 19-82 Apply LOCTITE and Install Pivot Bushings
2014 Carryall 295/XRT 1550 Maintenance and Service Manual
Angle Frame Bushings
1
Page 19-39
19