Lubricating The Attachment Arm And Interface - Intellitach - Club Car Carryall 295 2014 Maintenance And Service Manual

Lubricating the Attachment Arm and
10
PERIODIC MAINTENANCE Interface – IntelliTach
LUBRICATING THE ATTACHMENT ARM AND INTERFACE – INTELLITACH
Always use a good quality, lithium-based, multi-purpose grease. Apply lubricant until extra grease shows.
Grease the 8 grease fittings every 50 hours of operation, 2 times a year (whichever occurs first) or whenever the
attachment arm and interface are removed and reinstalled on the vehicle.
Lubricate the following locations as shown (Figure 10-4):
1. Attachment Interface Cylinder (both ends).
2. Attachment Arm Pivot - vehicle side (both sides).
3. Attachment Arm Cylinder (both ends).
4. Attachment Arm Pivot - interface side (both sides).
265
Figure 10-4 Lubricate Grease Zerks located on Cylinder
and Attachment Arm Ends
2014 Carryall 295/XRT 1550 Maintenance and Service Manual Page 10-9