13
Warning Lights
TESTING THE WARNING LIGHTS
See Test Procedure 28 – Low Oil Warning Light Circuit on page 11-33.
WARNING LIGHT REMOVAL
1.
Disconnect battery and spark plug wire(s). See Disconnecting the Battery – Gasoline/Diesel Vehicles on
page 1-3.
2.
Raise the hood.
3.
Disconnect the wires from the warning light (1) (Figure 13-6, Page 13-6).
4.
Press the retaining tabs and remove the warning light from the instrument panel.
WARNING LIGHT INSTALLATION
1.
Push a new warning light into the hole in the instrument panel until the plastic tabs are securely engaged (Figure
13-6, Page 13-6).
2.
Reconnect the wires from the wire harness to the warning light.
3.
Lower and secure the hood.
4.
Connect battery and spark plug wire(s). See Connecting the Battery – Gasoline/Diesel Vehicles, Section
1, Page 1-4.
1
11
9
2131
Page 13-6
2014 Carryall 295/XRT 1550 Maintenance and Service Manual
2
10
7
Figure 13-6 Instrument Panel Electrical Components
ELECTRICAL COMPONENTS: GASOLINE
3
8
13
12
VEHICLES
6