Set Stitching Capture - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual
Note
When the detection position is vehicle head, the lane line should be drawn from the bottom
along with the lane, allowing the license plate to occupy 100 pixels (for reference only). It
should be ensured that 0.5 s is kept for the license plate of a large vehicle to enter the license
plate recognition area and fall properly within the area. The top of the license plate
recognition area should not be too high so that the area will not be too big.
3) Click OK.
9. Set lane parameters according to the actual scene.
10. Click Save.

3.1.2 Set Stitching Capture

Set stitching capture when you need to stitch captured images.
Steps
1. Go to Configuration → Device Configuration → Application Mode .
2. Set Application Mode as Stitching Capture.
3. Select Driving Direction according to actual conditions.
4. Select Detected Position.
Note
Motion Detection Threshold, Sensitivity, Lower Stitching Edges, and Front View Detection
Mode are for professional personnel debugging only.
Figure 3-1 Set Stitching Capture
6