Set Composite Picture Overlay - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual
When the overlaid number digits are smaller than the fixed digits, 0 will be overlaid before
the overlaid number. For example, the fixed digits for lane No. is 2. If the lane No. is 1, 01 will
be overlaid on the picture.
5. Select the overlay information from the list.
Note
The overlay information varies with different models. The actual device prevails.
6. Set the overlay information.
Set Type
Set Overlay
Information
Set Overlay Position
Set Space
Set Line Break
Characters
Adjust overlay
sequence
7. Click Save.

3.2.5 Set Composite Picture Overlay

If you want to overlay information on the composite pictures, set composite picture overlay.
Steps
Note
The function is only available for Channel 1.
1. Go to Configuration → Device Configuration → Text Overlay → Composite Picture Overlay
Configuration .
2. Check Picture Overlay Text.
You can edit the type.
For some information types, you can edit the detailed information.
If you select Overlay on the Picture, you can check it. Then the
current information will be displayed from a new line.
Edit the number of spaces between the current information and the
next one from 0 to 255. 0 means there is no space.
Edit the number of characters from 0 to 100 between the current
information line and the previous information line. 0 means no line
break.
Click / to adjust the display sequence of the overlay
information.
11