Table of Contents
Advertisement
Note
For certain device models, you need to select Face Capture on VCA Resource page first.
●
This function is only supported by certain device models.
●
3.3.1 Set Auto Face Capture Rule
After setting the face capture rules and algorithm parameters, the device captures faces and
triggers linkage actions automatically.
Steps
1. Go to VCA → Face Capture → Face Recognition → Rule .
2. Check Enable.
3. Select a configuration mode.
Normal One detection scene is allowed to set. The device captures face in the scene in set
arming schedule.
See Normal Mode Settings for details.
Expert
The device can patrol among the detection scenes and capture face images.
Detection scenes and patrol schedule should be set in advance.
See Expert Mode Settings for details.
4. Click Save.
What to do next
Go to Picture to search and view the captured pictures.
Go to Smart Display to see currently captured face pictures.
Normal Mode Settings
Steps
1. Optional: Click Lock to lock PTZ control to prevent the interruption from other PTZ related action
during configuration.
Normally, the PTZ control is automatically locked when you enter the configuration interface.
You can manually resume the lock when the countdown is over.
2. Use PTZ control panel or click
3. Click
, and draw a detection area on live image.
4. Input Mounting Height of the device.
5. Input or draw the min. pupil distance and the max. pupil distance.
The Min. Pupil Distance and the Max. Pupil Distance are used to improve detection accuracy.
Only targets whose pupil distance are between the maximum distance and the minimum
distance trigger the capture.
Stitched PanoVu Camera with PTZ User Manual
to locate a scene with a face.
9
Advertisement
Table of Contents
