HIKVISION iDS-TCH44P-B User Manual page 42

Network Traffic Camera (Multi-lens LPR Camera) User Manual
Before You Start
Please check the video encoding type. ROI is supported when the video encoding type is H.264 or
H.265.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → ROI .
2. Select a channel.
3. Select Stream Type.
4. Set ROI region.
1) Check Enable.
2) Select Area Code.
3) Click Draw Area.
4) Drag the cursor to draw a fixed area and adjust the area according to actual needs.
5) Click Stop Drawing.
5. Select ROI Level and enter Area Name.
Note
The higher the ROI level is, the clearer the image of the detected area is.
6. Click Save.
7. Optional: Select other area codes and repeat the steps above if you need to draw multiple fixed
areas.
Figure 6-3 Set ROI
32