Table of Contents
Advertisement
Network Traffic Camera (Multi-lens LPR Camera) User Manual
Chapter 11 Maintenance
11.1 View Device Information
Basic Information and Algorithms Library Version
Go to Configuration → Device Configuration → System Configuration → Device Information to
view the basic information and algorithms library version of the device.
You can edit Device Name and Device No. The device No. is used to control the device. It is
recommended to reserve the default value.
Device Status
Go to Configuration → Device Status to view the device status.
11.2 Log
11.2.1 Enable System Log Service
The security audit logs refer to the security operation logs. You can search and analyze the security
log files of the device so as to find out the illegal intrusion and troubleshoot the security events.
Security audit logs can be saved on device internal storage. The log will be saved every half hour
after device booting. Due to limited storage space, you are recommended to save the logs on a log
server.
Steps
1. Go to Configuration → Device Configuration → System Configuration → Service .
2. Check Enable System Log Service.
3. Enter IP Address and Port No. of the log server.
4. Click Save.
Result
The device will upload the security audit logs to the log server regularly.
11.2.2 Search Log
Log helps to locate and troubleshoot problems.
Steps
1. Click Log.
2. Set search conditions.
47
Advertisement
Table of Contents
