Set Ssh; Set Ip Address Filtering - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual

10.5 Set SSH

To raise network security, disable SSH service. The configuration is only used to debug the device
for the professionals.
Steps
1. Go to Configuration → Device Configuration → System Configuration → Service .
2. Uncheck Enable SSH Service.
3. Click Save.

10.6 Set IP Address Filtering

You can set the IP addresses allowable and not allowable to access the device.
Steps
1. Go to Configuration → Device Configuration → System Configuration → Service .
2. Check Enable IP Address Filtering.
3. Set Filtering Mode.
Blocklist Mode
The added IP addresses are not allowed to access the device.
Allowlist Mode
The added IP addresses are allowed to access the device.
4. Add an IP address.
1) Click Add.
2) Enter the IP address.
3) Click Add.
Note
The IP address only refers to the IPv4 address.
5. Optional: Edit, delete, or clear the added IP addresses.
6. Click Save.
46