View Traffic Flow Statistics - HIKVISION iDS-TCH44P-B User Manual

Network Traffic Camera (Multi-lens LPR Camera) User Manual
- Click Capture to enable manual capture. The captured pictures will be saved in the set local
path. Or you can click Open Folder to view the pictures.
- Click Measuring license plate/Ruler On to measure the license plate pixel. After the
measurement, click Closing measurement/Ruler Off.
- Click after Continuous Capture to set the burst parameters.
Capture Times
Up to five pictures can be captured per burst.
Continuous Capture Intervals
Up to four intervals can be set, and the default interval is 100 ms.
Click Continuous Capture, and the device will capture pictures according to the set
intervals.

3.5 View Traffic Flow Statistics

The device supports counting and uploading traffic flow data.
Steps
1. Go to Configuration → Device Configuration → System Configuration → Traffic Parameters .
2. Check Enable.
3. Set Interval.
4. Click Save.
15