Network Traffic Camera (Multi-lens LPR Camera) User Manual
6. Click Save.
3.2.4 Set Capture Overlay
If you want to overlay information on the captured pictures, set capture overlay.
Steps
Note
The supported parameters vary with different channels. The actual interface prevails.
1. Go to Configuration → Device Configuration → Text Overlay → Capture Overlay Configuration .
2. Select a channel.
3. Check Capture Picture Overlay.
4. Set the percentage, font size, color, etc.
Percentage
It is the percentage that the overlaid information occupies on the picture. For example, if you
set the percentage to 50, the overlaid information in a row will occupy up to half of the image
width, and the excess content will be overlaid from a new line.
Overlay Number Zeroizing
Figure 3-5 Set Capture Overlay
10