Memory Function - Hartmann Veroval Compact+ Instructions For Use Manual

EN English
Automatic Bluetooth® data transfer after measurement
• If automatic Bluetooth ® data transfer is activated, the Bluetooth ® flashes
on the display. The blood pressure monitor now attempts to connect to the
Veroval® medi.connect app for approx. 2 minutes. The Veroval® medi.connect app must
be active to allow data transfers.
As soon as a connection is established, all measurement data is
automatically transferred to the app. During transmission the
Bluetooth ® symbol is displayed permanently and the results
indicator on the left of the display runs from bottom to top (see
Fig. 2).
If you press the START/STOP button in the meantime, the
transfer is cancelled and the device turns off. Once all data has
been transferred successfully, the result indicators are displayed
Fig. 2
permanently (see Fig. 3) and the device switches off. If a
connection to the app cannot be established after 2 minutes, the
Bluetooth ® symbol goes off and the blood pressure monitor
switches off automatically after 5 seconds.
• To switch off the device, press the START/STOP button
, otherwise the device switches off automatically after
2 minutes.
Fig. 3
IFU_9252050_020323.indd 22-23 IFU_9252050_020323.indd 22-23
If you wish to stop the measurement for any reason, simply press the START/
STOP button . The inflation or measurement process is interrupted and
cuff pressure is automatically released.

6. Memory function

User memory
• The Veroval® BPW 26 stores up to 100 measurements in each user memory. The
most recent measurement is always saved together with the date and time in
memory slot no. 1 and all older saved values are moved up one memory slot. Once
all memory slots are occupied, the oldest value is deleted.
• The device has two memory buttons, and , that are used to record the
measurement results for two separate users. represents the measured values
for the first user, represents the measured values for the second user. After the
measurement is finished, you can assign the measured value to the respective person
by pressing and . This assignment can be made for 10 seconds. If you do not
assign them, the measured value is automatically stored in the user memory that is
currently displayed.
• The time of the measurement is also saved, along with each of the blood pressure
values, to enable the morning and evening averages to be determined. The time saved
in the device must therefore be set correctly to the actual time (see Chapter 4, section
'Setting the date, time and Bluetooth ®').
22
Veroval® BPW 26 features the following measurement data storage functions
(corresponding to the guidelines of the European Society of Hypertension (ESH)):
• Individual measured value memory
• Average value of all measured blood pressure values per user
• Average value of the morning values
• Average value of the evening values
Veroval ® BPW 26 follows the recommendations of the European Society of
Hypertension (ESH) and differentiates between measurements taken in the
morning and those taken in the evening. This distinction is medically relevant
because blood pressure changes over the course of the day. With this
information, your doctor is more likely to identify the right treatment for you if
you should need medicinal treatment for high blood pressure.
English
• The memory recall is activated by pressing the or button with the device
switched off. For values saved in the first user memory, press the button, for the
second user memory press the memory button.
• If automatic data transfer is activated, the Bluetooth® flashes on the display. The
blood pressure monitor now attempts to connect to the Veroval® medi.connect app
for approx. 2 minutes. The Veroval® medi.connect app must be active to allow
data transfers. As soon as a connection is established, all measurement data is
automatically transferred to the app.
• During transmission the Bluetooth ® symbol is displayed permanently and the
results indicator on the left of the display runs from bottom to top. If you press the
START/STOP button in the meantime, the transfer is cancelled and the device
turns off.
• Once all data has been transferred successfully, the result indicators are displayed
permanently and the device automatically switches off after 30 seconds.
23
EN
02.03.23 10:42 02.03.23 10:42