Memory Function - Hartmann TENSOVAL comfort Instructions For Use Manual

itself off automatically after
3 minutes.
I f you wish to stop measurement
�
for any reason, simply press the
START/STOP button. The inflation
or measuring procedure is inter-
rupted and an automatic fall in
pressure occurs.
If this symbol
�
the left of the display next to the
diastolic reading (DIA), the device
has detected an irregular heart-
beat during measurement. How-
ever, the measurement may also
have been disrupted by body
movement or speaking. It is best
to repeat the measurement. If you
regularly see this symbol during
your blood pressure measurements,
we recommend having your heart
rhythm checked by your doctor.

5. Memory function

T he memory recall is activated
�
by pressing the memory button,
when the device is switched off.
Press M1 for the first person's
stored values and M2 for the
second person. The corresponding
symbol M1 or M2 will be
displayed. First, the average value
of all stored data will be shown
for the corresponding person. An
"A" appears on the display and
the number of readings, from
which the average value was
calculated, is displayed in the top
right-hand corner (see fig.).
can be seen to
139
Press the memory button to
access memory position number 1.
T ensoval comfort can store up to
�
60 measurements per memory
button. The most recent meas-
ured value is always at memory
position number 1 and all old
measured values shift down one
memory position. When all
memory positions are occupied
the oldest value will be deleted
each time.
B y repeatedly pressing the
�
memory button all stored values
can be recalled one by one.
T he measured value and the
�
relevant number of the memory
position appear when you access
stored values. The memory
position, date and time appear
in 2 – 3 second intervals.
Y ou can cancel the memory
�
function at any time by pressing
the START/STOP button.
Otherwise the device will switch
itself off automatically after a
few seconds.
E ven if the power supply fails,
�
e.g. when changing the batter-
ies, the stored values will still be
available.
English
GB