Memory Function; Transferring Measured Values To Veroval ® Medi.connect - Hartmann Veroval BP750X Instructions For Use Manual

8. Memory function

User memory
The Veroval ECG and blood pressure monitor saves a total of up to 64 mea-
®
surements in each user memory for ECG (Fig. 1) and/or blood pressure (Fig. 2),
including the date and time of the measurement.
Memory recall is activated by pressing the
SAVE button when the monitor is swit-
ched off. By repeatedly pressing the SAVE
button , all stored values can be recalled
one by one. To switch between user memo-
ries and , hold the SAVE button
down for 3 seconds.
You can cancel viewing the saved measured values at any time by
pressing the START/STOP button
off automatically after 30 seconds.
Even if the power supply is interrupted, e.g. when changing the bat-
teries, the stored values will still be available once full batteries are
reinserted.
Deleting saved readings
All data saved for each user can be separately deleted for user
memory and user memory
entire memory for a particular user, press the SAVE button
again and hold it down together with the START/STOP button
for 5 seconds. All data in the selected user memory are now
deleted (Fig. 1). If you release the button ahead of time, no data
will be deleted.
9. Transferring measured values to Veroval
medi.connect
Download the Veroval
www.veroval.info. Compatible with any computer with Windows 7, 8 or 10
(for the duration of official Microsoft support).
. If you would like to delete the
medi.connect software from the website
®
61
English
Fig. 1
. Otherwise, the device will switch
®
EN
Fig. 2
Fig.1