Memory Function - Hartmann Veroval BPM25 Instructions For Use Manual

English
GB
After the measurement is complete, the systolic and diastolic
blood pressure as well as the pulse rate (see Fig. below)
appear simultaneously.
In addition to the measured values, the time, date, the
associated user memory
memory numbers (e.g.
automatically stored in the displayed user memory. As long
as the result of the measurement is displayed, you can assign
values to the corresponding user memory by pressing the
or button. If you do not assign them, the measured value
is automatically stored in the displayed user memory. You can
use the results indicator on the left of the display to classify
your measurement result (see table in Chapter 3 Blood pres-
sure information).
758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 74 758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 74
O
K
or as well as the associated
) appear. The measured value is
To switch off the monitor, press the START/STOP button
otherwise the monitor will automatically switch off after
60 seconds.
If you wish to stop the measurement for any reason,
simply press the START/STOP button.
or measurement is interrupted and the pressure is auto-
matically released.
If this symbol is shown in the display, the unit has detect-
ed an irregular heartbeat during the measurement. However,
the measurement may also have been disrupted by body
movement or speaking. It is best to repeat the measurement.
If you see this symbol regularly when measuring your blood
pressure, we recommend that your doctor checks your heart
rhythm.

6. Memory function

User memory
The Veroval wrist blood pressure monitor stores up to 100
®
measurements in each user memory. Once all memory slots
are occupied, the oldest value is deleted.
74
,
The cuff inflation
26.03.20 08:33 26.03.20 08:33