Memory Function; User Memory - Hartmann Veroval 9253242 Instructions For Use Manual

English
GB
In addition to the measured values, the time, date, the
associated user memory
memory numbers (e.g.
automatically stored in the displayed user memory. As long
as the result of the measurement is displayed, you can assign
values to the corresponding user memory by pressing the
or button. If you do not assign them, the measured value
is automatically stored in the displayed user memory. You can
use the results indicator on the left of the display to classify
your measurement result (see table in Chapter 3 Blood pres-
sure information).
To switch off the monitor, press the START/STOP button
otherwise the monitor will automatically switch off after
60 seconds.
758485-1219_Veroval_Handgelenk-BPM_GB_AR_HK_TR_LB7 2020-03-18.indd 20 758485-1219_Veroval_Handgelenk-BPM_GB_AR_HK_TR_LB7 2020-03-18.indd 20
O
K
or as well as the associated
) appear. The measured value is
If you wish to stop the measurement for any reason,
simply press the START/STOP button.
or measurement is interrupted and the pressure is auto-
matically released.
If this symbol is shown in the display, the unit has detect-
ed an irregular heartbeat during the measurement. However,
the measurement may also have been disrupted by body
movement or speaking. It is best to repeat the measurement.
If you see this symbol regularly when measuring your blood
pressure, we recommend that your doctor checks your heart
rhythm.

6. Memory function

User memory

The Veroval wrist blood pressure monitor stores up to 100
®
measurements in each user memory. Once all memory slots
are occupied, the oldest value is deleted.
Memory recall is activated by pressing the
when the monitor is switched off. For values saved in the first
,
user memory, press the
ry press the button.
20
The cuff inflation
or button
button, for the second user memo-
26.11.20 09:56 26.11.20 09:56