NEC mPD784225 Series User Manual page 52

16-/8-bit single-chip microcontrollers
Table of Contents

Advertisement

(11) AV
REF1
This is the reference power input pin of the D/A converter.
If the D/A converter is not used, connect to the V
(12) AV
DD
This is the analog power supply pin of the A/D converter. Even if the A/D converter is not used, always use this
pin at the same potential as the V
A/D converter.
(13) AV
SS
This is the ground potential pin of the A/D converter. Even if the A/D converter is not used, always use this pin
at the same potential as the V
(14) RESET
This is the active low system reset input pin.
(15) X1, X2
These are the crystal resonator connection pins for main system clock oscillation.
When an external clock is supplied, input this clock signal at X1, and its inverted signal at X2.
(16) XT1, XT2
These are the crystal resonator connection pins for subsystem clock oscillation.
When an external clock is supplied, input this clock signal at XT1, and its inverted signal at XT2.
(17) V
, V
DD0
DD1
V
is the positive power supply pin for the ports.
DD0
V
is the positive power supply pin for other than the ports and analog pins.
DD1
Always use this pin at the same potential as pin V
(18) V
, V
SS0
SS1
V
is the ground potential pin for the ports.
SS0
V
is the ground potential pin for other than the ports and analog pins.
SS1
Always use this pin at the same potential as pin V
( µ PD78F4225, 78F4225Y only)
(19) V
PP
This is the high-voltage application pin when setting the flash memory programming mode and writing or verifying
the program.
In the normal operation mode, connect directly to V
For the pull-down connection, use of a resistor with a resistance between 470 Ω and 10 kΩ is recommended.
(20) TEST
This is the pin used in the IC test. Connect directly to V
For the pull-down connection, use of a resistor with a resistance between 470 Ω and 10 kΩ is recommended.
52
CHAPTER 2 PIN FUNCTIONS
pin.
DD0
pin. AV
functions alternately as the reference voltage input pin of the
DD0
DD
pin.
SS0
and V
DD0
and V
SS0
or pull down.
SS0
SS0
User's Manual U12697EJ3V0UM
.
DD1
.
SS1
or pull down.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpd784225y seriesMpd784224Mpd784225Mpd78f4225Mpd784224yMpd784225y ... Show all

Table of Contents