NEC mPD784225 Series User Manual page 154

16-/8-bit single-chip microcontrollers
Table of Contents

Advertisement

8.3 Control Registers
The following four types of registers control the 16-bit timer/event counter.
• 16-bit timer mode control register 0 (TMC0)
• Capture/compare control register 0 (CRC0)
• 16-bit timer output control register 0 (TOC0)
• Prescaler mode register 0 (PRM0)
(1) 16-bit timer mode control register 0 (TMC0)
This register specifies the operation mode of the 16-bit timer; and the clear mode, output timing, and overflow
detection of 16-bit timer counter 0 (TM0).
TMC0 is set by a 1-bit or 8-bit memory manipulation instruction.
RESET input sets TMC0 to 00H.
Caution 16-bit timer counter 0 (TM0) starts operating when a value other than 0, 0 (operation stop
mode) is set to TMC02 and TMC03. To stop the operation, set 0, 0 to TMC02 and TMC03.
154
CHAPTER 8 16-BIT TIMER/EVENT COUNTER
User's Manual U12697EJ3V0UM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpd784225y seriesMpd784224Mpd784225Mpd78f4225Mpd784224yMpd784225y ... Show all

Table of Contents