NEC mPD784225 Series User Manual page 209

Figure 10-3. Format of 8-Bit Timer Mode Control Register 6 (TMC6)
Address: 0FF69H After reset: 00H R/W
Symbol 7
TMC6 TCE6 TMC66
TMC66
TMC64
Caution When selecting the TM6 operation mode using TMC66 or selecting discrete/cascade connection
mode using TMC64, stop the timer operation in advance. To stop the timer operation during
cascade connection, clear both bit 7 (TCE5) of 8-bit timer mode control register 5 (TMC5) and
bit 7 (TCE6) of TMC6.
CHAPTER 10 8-BIT TIMERS 5, 6
6 5 4
0 TMC64
TCE6
0 Counting is disabled (prescaler disabled) after the counter is cleared to 0.
1 Start counting
0 Clear and start mode when TM6 and CR60 match
1 PWM (free running) mode
Discrete mode or cascade connection mode selection
0 Discrete mode
1 Cascade connection mode (connection with TM5)
User's Manual U12697EJ3V0UM
3 2
0 0
TM6 count control
TM6 operation mode selection
1 0
0 0
209