Table of Contents
Advertisement
6
Installing the
Production-Year Decal
CE Machines Only
Parts needed for this procedure:
1
Production-year decal
Procedure
If you use this machine in a country that complies to
CE standards, apply the production-year decal near
the serial plate; refer to
1. Serial plate
7
Installing the Grass Basket
Parts needed for this procedure:
1
Grass basket
Procedure
1.
Grasp the basket by the handle.
2.
Guide the basket lip between the cutting unit
side plates and over the front roller
Figure
11.
Figure 11
2. Production-year decal
(Figure
1. Basket hooks
3.
Install the basket hooks over the frame loop
(Figure
12).
Important:
If you ever drop the basket, examine
the pitch-arm contact points near the lower lip
of the basket for damage
them before using the basket.
Using the basket with bent pitch-arm contact
points may cause contact between the basket
and cutting unit, causing undesired noise and/or
damage to the basket and cutting unit.
g233866
1. Pitch-arm contact point
12).
11
Figure 12
(Figure
13). Straighten
Figure 13
g032407
g032408
Advertisement
Table of Contents
