Table of Contents
Advertisement
COM-HPC-ALT User's Guide
PICMG COM-HPC R1.0
5.4 BIOS Default Reset
To perform a hardware reset of the default BIOS settings, follow the steps below:
1. Shut down the system.
2. Hold down the BIOS Setup Defaults Reset Button continuously and boot up the system. You can release the button when the BIOS prompt screen
appears.
3. The BIOS prompt screen will display a confirmation that BIOS defaults have been reset and request that you reboot the system.
Page 35
Copyright © 2023 ADLINK Technology, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the arm AMPERE COM-HPC-ALT and is the answer not in the manual?