Nova430e Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide
The GPS antenna system includes an antenna and a connector. The two parts should be assembled
according to Figure 3-3.
Figure 3-3: GPS Antenna Installation
After assembling the GPS antenna, the connector must be waterproofed with all-weather electrical tape
and mastic tape. Refer to
section
2.5.
3.3 Install eNB on Pole or Wall
The eNB mounting brackets are pre-assembled in manufacturing before packing. One bracket is pre-
installed on the back of the eNB, and the other is for pole or wall mounting, as shown in Figure 3-4.
Figure 3-4: Pre-assembled Brackets
17