Leds And Interfaces; Figure 2-2: Leds And Interfaces; Table 2-3: Leds; Table 2-4: Interfaces - Baicells Nova430e Installation Manual

Nova430e Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide

2.2 LEDs and Interfaces

Figure 2-2, Table 2-3, and Table 2-4 explain the eNB status indicators and interfaces.

Figure 2-2: LEDs and Interfaces

Table 2-3: LEDs

LED Color Status
Steady on
PWR Green
OFF
OFF
CELL2 Green Fast flash: 0.1 s on, 0.1 s off
Slow flash: 1 s on, 1 s off
OFF
CELL1 Green Fast flash: 0.1 s on, 0.1 s off
Slow flash: 1 s on, 1 s off
Steady on
ALM Red
OFF

Table 2-4: Interfaces

Interface Description
ETH/PoE+ RJ-45 interface (FE/GE). Used for power supply, debug or data backhaul. PoE++, complies
with IEEE 802.3bt standard
GPS GPS antenna interface, N-type connector
ANT0 External antenna interface 1, N-type connector
ANT1 External antenna interface 2, N-type connector
ANT2 External antenna interface 3, N-type connector
ANT3 External antenna interface 4, N-type connector
Description
Power is on
No power supply
CELL1 is inactive
CELL1 is deactivated
CELL1 is activated
CELL2 is inactive
CELL2 is deactivated
CELL2 is activated
Hardware alarm
No alarm
12