Baicells Nova430e Installation Manual page 9

Outdoor 4x250mw two-carrier tdd enodeb
Hide thumbs Also See for Nova430e:
Table of Contents

Advertisement

Nova430e Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide
NOTE 1: Legacy Gen 1 CPEs do not support SAS.
NOTE 2: This installation guide only covers the basic configuration of a single cell for verifying
that the eNB unit is operational during the process of installation. More detailed configuration
guides are available on the Baicells website: Baicells.com > Resources > Documents:
CloudCore Configuration and Network Administration Guide
Atom CAT4 CPE Configuration Guide
Atom CAT6/CAT15 CPE Configuration Guide
4G LTE eNodeB Configuration Guide – BaiBLQ (formerly QRTB)
Carrier Aggregation and Dual Carrier/Split Mode Configuration Guide
HaloB Solution User Guide
SAS Deployment Guide
In addition to the Nova430e eNB two carriers and multiple operating modes, the following is a list of other
key features. The Nova430e datasheet providing technical specifications is kept up-to-date on the
Baicells
website.
Supports standard LTE TDD Band 48 (3550 MHz – 3700 MHz)
Complies with 3GPP Release 15 standards
Supports 5/10/15/20 MHz bandwidth per carrier
Provides excellent Non-Line-of-Sight (NLOS) coverage
Peak rate is a configurable parameter using special Subframe Assignment (SA):
o 2x20 MHz, per carrier:
SA1: DL 105 Mbps, UL 28 Mbps
SA2: DL 145 Mbps, UL 14 Mbps
SA6: DL 85 Mbps, UL 35 Mbps
o 2x10 MHz, per carrier:
SA1: DL 51 Mbps, UL 14 Mbps
SA2: DL 70 Mbps, UL 7 Mbps
SA6: DL 42 Mbps, UL 17 Mbps
Supports 96 concurrent users per carrier [x2 carriers (96+96) if operating in DC mode];
upgradeable to higher capacity in future software releases
Supports TR-069 network management interface
GUI-based remote Web management using Baicells OMC
Connects to any IP-based backhaul, including public transmission
Is lightweight and uses low power consumption to reduce OPEX
Compact, plug-and-play device with Self-Organizing Network (SON) capabilities
Can be used for Internet of Things (IoT) with all Standard EPC vendors
Ensures secure protection against illegal intrusion
Optional external Global Positioning System (GPS) antenna
Integrated small cell form-factor for quick and easy installation
Configured out-of-the-box to work with Baicells CloudCore
Supports both CA and DC modes
9

Advertisement

Table of Contents
loading

Table of Contents