decon JW Smart Tune Operation Manual page 27

Joystick model
4 Operating Joystick model
4.5.3 Function Parameters
1
2
3
4
1 [Auto-power-off time]
This sets the time until the power is automatically turned off after the last joystick operation.
When set to [Disable Auto-power-off], the power does not automatically turn off.
2 Buzzer
This turns ON and OFF the operation sounds emitted when the propulsion controller is turned
ON and when the speed is switched, as well as the sounds emitted by the buzzer when the
joystick is operated with the clutch lever set to manual.
Even when set to [Off], the sound emitted by the buzzer when a warning or error occurs does
not get turned off
3 Screen brightness
This sets the level of LED brightness of the propulsion controller.
4 Electromagnetic brake timing
This sets the activation timing of the electromagnetic brake.
Even if [10sec after stop] is selected, the electromagnetic brake is immediately applied when
a wheel moves without operation of the joystick.
5 Wheelchair action when ST cable is connected
This setting is used to select the operation of the wheelchair when the communication cable
is connected.
If [Stop] is selected, the wheelchair cannot be operated while the communication cable is
connected to the propulsion controller.
5
6
27