Service Window - decon JW Smart Tune Operation Manual

Joystick model
4 Operating Joystick model
4.7

Service Window

Depending on the serial number used during installation, this menu may be inaccessible. Contact your
software provider if you need to access this menu.
4.7.1 Tabs and Icons
1
1 [Basic information1] Tab
This tab displays the information and Product serial No. of the left and right wheel units.
2 [Basic information2] Tab
Switching to this tab displays information such as the serial number, Product serial No., and
usage history of the propulsion controller.
3 [Open] Icon
This icon opens the data files saved to the PC. P.24 "4.4.2 Recalling Setting Data"
The same operation can be performed by selecting [File] > [Open] from the menu bar.
4 [Read] Icon
This icon reads and displays the parameter values and basic information set in the wheelchair.
The same operation can be performed by selecting [Communication] > [Read driving
parameters from wheelchair] from the menu bar.
5 [Write] Icon
This icon writes the parameter values displayed on the screen to the wheelchair.
The same operation can be performed by selecting [Communication] > [Write driving
parameters to wheelchair] from the menu bar.
Writing cannot be performed when the area for the Product serial No. of the
propulsion controller (on the [Basic Information2] tab) is blank.
6 [Save to PC] Icon
This icon saves the parameter values displayed on the screen to the PC. If the same file
already exists in the wheelchair, the data will be replaced. P.23 "4.4.1 Saving Setting Data"
The same operation can be performed by selecting [File] > [Save] from the menu bar.
7 [Line status] Display
This display indicates the line status of the wheelchair by color.
Communication Port"
3
2
35
4 5 6 7
P.18 "4.2 Setting the