Operating Joystick Model; Selecting A Menu - decon JW Smart Tune Operation Manual

Joystick model

4 Operating Joystick model

4 Operating Joystick model
4.1

Selecting a Menu

On the Model Menu screen, select [1. Joystick model] to display the Main Menu screen.
1 Driving Parameters Window
This window allows you to check the information of the electrically powered unit in the wheelchair,
and change parameters related to driving characteristics and joystick operation.
Driving Parameters Window"
The window also allows you to examine joystick operation under set parameters.
Joystick Path Setting Window"
2 Service Window
This window allows you to check service information, such as the model information of the propulsion
controller and joystick signal characteristics.
P.35 "4.7 Service Window"
Depending on the serial number used during installation, this menu may be inaccessible. Contact
your software provider if you need to access this menu.
When the menu option is selected, a message regarding reading of the wheelchair's data will be
displayed. Press [OK] following the instruction on the screen.
Pressing [Cancel] will start the window without connecting. Select the communication
port and read the wheelchair's data manually. P.18 "4.2 Setting the Communication
Port"
1
2
17
P.25 "4.5
P.33 "4.6