decon JW Smart Tune Operation Manual page 32

Joystick model
4 Operating Joystick model
4.5.6 Preinstalled setting on "Modify and use"
When you want to change [Parameter 1] or [Parameter 2] using [Modify and use], you can do so
based on the preset [Soft], [Standard], and [Sports] settings.
1
Load the setting data of the wheelchair using the icon or menu bar.
2
Choose the preset settings that you want to use as a base by selecting the
[Preinstalled setting] icon or [Tool] > [Use preinstalled setting on "Modify and
use"] from the menu bar.
3
Free Mode is then selected with the preset values in place, allowing you to
individually change the parameters.
Simply changing the parameters on the screen does not change the settings
of the wheelchair. Changes are applied when writing is complete.
4.5.7 Return screen parameters to default
Select the [Default] icon or [Tool] > [Return screen parameters to default] from the menu bar
to display the factory preset values of the 24" model or the 16" model. Select the settings in
accordance with the model of the electrically powered unit in the connected wheelchair.
This operation will be applied to all the settings of [Functional Parameters], [Parameter 1], and
[Parameter 2].
Simply changing the parameters on the screen does not change the settings of the
wheelchair. Changes are applied when writing is complete.
32