decon JW Smart Tune Operation Manual page 30

Joystick model
4 Operating Joystick model
4.5.5 Parameter 2
The [Parameter 2] tab configures settings related to the operational characteristics of the joystick.
If you want to individually change the parameters, you need to select [Modify and use] on the
[Parameter 1] tab.
The [Range] and [Dead zone] set on this screen are reflected in the graph display on the Joystick
Path Setting Window.
P.33 "4.6 Joystick Path Setting Window"
1
2
3
4
1 Range
This area sets the effective range of joystick input. The area appears in green on the graph
display on the Joystick Path Setting Window. In the effective range, the speed is adjusted in
accordance with the tilt of the joystick. With the joystick tilted outside of the effective range,
the speed becomes the maximum speed.
Setting the value to [Narrow] lessens the tilt required for maximum speed, causing the speed
to increase without significant movement of the joystick.
Setting
Graph Display
2 Filter
This area sets the sensitivity filter with respect to joystick input. When the user's hand slightly
shakes or the like, configuring a dull setting suppresses excessive input, making it possible to
smoothly operate the wheelchair.
Narrow
Speed becomes
maximum at a slight tilt
30
Normal
Speed becomes
maximum at a heavy tilt
Wide