Wheelchair Path Window - decon JW Smart Tune Operation Manual

Servo model
5 Operating Servo model
5.7

Wheelchair Path Window

1 Distance between wheels
This area allows you to enter the distance between wheels for calculating wheelchair path.
The distance is set to 0.51 m by default. When the data from automated diagnostics is saved to the
PC, the numerical value at the time the [Draw] button is selected is saved.
2 Graph Display
This area shows the driving path of the wheelchair.
The area shows the forward and reverse directions along the vertical axis from a reference position
(forward: upper part of graph; reverse: lower part of graph), and the left and right directions along
the horizontal axis (left wheel: left side of graph; right wheel: right side of graph).
3 [Zoom] Icon
This icon zooms the graph in and out.
The graph is displayed at its minimum size by default. The size can be increased to twice the
minimum size.
You can zoom in and out by placing the cursor over the graph and using the mouse wheel.
4 [Wheelchair Path] Icon
This icon redraws the path corresponding to the [Distance between wheels] numerical value. When
no value or an invalid value is entered in [Distance between wheels], a message appears and the
path is not drawn.
5 [Print] Icon
This icon opens the print preview of the driving path.
Driving Wheelchair Path"
The same operation can be performed by selecting [File] > [Print] from the menu bar.
1
2
3 4
60
5
P.68 "5.9.3 Wheelchair Path Window: