decon JW Smart Tune Operation Manual page 51

Servo model
5 Operating Servo model
5.5.3 Functional Parameters
1
2
3
4
1 [Auto-power-off time]
This sets the time until the power is automatically turned off after the last hand rim input with
the wheelchair turned on.
When set to [Disable Auto-power-off], the power does not automatically turn off.
2 Buzzer
This turns ON and OFF the sounds emitted by the buzzer when the power switch and the
mode switch are operated.
Even when set to [Off], the sound emitted by the buzzer when a warning or error occurs does
not get turned off.
3 LED Brightness
This sets the level of LED brightness of the power switch and the mode switch.
The LED does not light up when set to [Off].
Even if the level of brightness was changed, the LED lights up at a brightness of [3:bright]
during the initial operation when the wheelchair power is turned on. The LED changes to the
set brightness after the initial operation is complete.
4 Mode switch
Select whether or not to enable mode switching according to the wheelchair's specifications.
Select [None] to hide the [Mode 2] tab.
51