Table of Contents
Advertisement
Servo model
5 Operating Servo model
5 Operating Servo model
5.1
Selecting a Menu
On the Model Menu screen, select [2. Servo model] to display the Main Menu screen.
1 Driving Parameters
This menu allows you to check the information of the electrically powered unit and make changes
to the settings of functional parameters (buzzer, LED brightness, etc.) and parameters related to
driving characteristics. P.49 "5.5 Driving Parameters Window"
The menu also automatically runs diagnostics based on the driving data saved in the wheelchair.
P.58 "5.6 Automated Diagnostics Tool Window"
2 Service
This menu allows you to check the model information of the left and right wheel units and service
information such as driving distance, as well as change settings such as the number of springs of
the electrically powered unit. P.61 "5.8 Service Window"
Depending on the serial number used during installation, this menu may be inaccessible. Contact
your software provider if you need to access this menu.
When the menu option is selected, a message regarding reading of the wheelchair's data will be
displayed. Press [OK] following the instruction on the screen.
1
2
41
Advertisement
Table of Contents
