decon JW Smart Tune Operation Manual page 62

Servo model
5 Operating Servo model
7 [Read] Icon
This icon reads and displays the parameter values and basic information set in the wheelchair.
The same operation can be performed by selecting [Communication] > [Read service
information from wheelchair] from the menu bar.
8 [Write] Icon
This icon writes the parameter values displayed on the screen to the wheelchair.
The same operation can be performed by selecting [Communication] > [Write service
information to wheelchair] from the menu bar.
9 [Save to PC] Icon
This icon saves the parameter values displayed on the screen to the PC. If the same file
already exists in the wheelchair, the data will be replaced. P.47 "5.4.1 Saving Setting Data"
The same operation can be performed by selecting [File] > [Save As] from the menu bar.
 [Line Status] Display
This display indicates the line status of the wheelchair by color.
Communication Port"
5.8.2 Reading unit backup service information
Selecting [Communication] > [Read right unit backup service information] from the menu bar loads
the service information of the right and left wheel units from the right wheel unit.
Selecting [Read left unit backup service information] similarly loads the service information of both
units from the left wheel unit.
This feature is used when you want to replace the substrate of one side only by restoring the
service information from the substrate not to be replaced.
62
P.42 "5.2 Setting the