decon JW Smart Tune Operation Manual page 50

Servo model
5 Operating Servo model
7 [Write] Icon
This icon writes the parameter values displayed on the screen to the wheelchair.
The same operation can be performed by selecting [Communication] > [Write driving
parameters to wheelchair] from the menu bar.
When the software version of the connected electrically powered wheelchair
unit differs from the software version on the screen (software version of the
data to be written), such as when data set in another wheelchair is loaded and
used, writing is canceled.
8 [Save to PC] Icon
This icon saves the parameter values displayed on the screen to the PC. If the same file
already exists in the wheelchair, the data will be replaced. P.47 "5.4.1 Saving Setting Data"
The same operation can be performed by selecting [File] > [Save] from the menu bar.
9 [Print] Icon
This icon opens the print preview of the parameter values set in [Mode 1] and [Mode 2].
P.66 "5.9.1 Driving Parameters Window: Settings"
The same operation can be performed by selecting [File] > [Print] from the menu bar.
 [Line status] Display
This display indicates the line status of the wheelchair by color.
Communication Port"
5.5.2 Basic Information
Displays the read data on the wheelchair's left and right drive units. The data cannot be replaced.
50
P.42 "5.2 Setting the