decon JW Smart Tune Operation Manual page 29

Joystick model
4 Operating Joystick model
4.5.4 Parameter 1
The [Parameter 1] tab configures settings related to the driving characteristics of the wheelchair.
Select either [Parameter setting way (Selection)] that uses preset values, or [Parameter setting way
(Modification)] that allows you to customize parameters.
1
2
1 Selecting the Parameter Setting Method
Select one of the three preset methods ([Soft], [Standard], or [Sports]) or [Modify and use] in
the [Parameter setting way (Modification)] mode.
When one of the modes in [Parameter setting way (Selection)] is selected, the settings in
[Parameter 1] and [Parameter 2] are fixed to preset values and cannot be changed.
When [Parameter setting way (Modification)] mode is selected, the parameters can be
individually changed.
Values that are grayed out and locked on the screen when [Parameter setting
way (Selection)] mode is selected are values set when [Parameter setting way
(Modification)] mode is selected. The values do not indicate preset values set
by the [Parameter setting way (Selection)] mode.
2 Speed
This area is used to set the maximum speed when driving Forward and Backward and when
Turning. The % indicates the percentage with respect to the maximum speed of the wheelchair.
3 Motor Torque
This area is used to set the torque limit in accordance with the estimated weight of the user.
A high torque with respect to weight may cause the wheelchair to jerk. Increasing the torque
limit suppresses such jerking, making the wheelchair run more smoothly.
4 Acceleration/Deceleration
This area is used to set the acceleration and deceleration rate when moving forward and when
turning.
29
3
4