decon JW Smart Tune Operation Manual page 59

Servo model
5 Operating Servo model
1
When the data of the left and right wheels are displayed in the same graph
1 Graph Display
This area displays the left and right hand rim input and wheel speed in a graph.
Selecting [View] > [Integrate two charts into one] from the menu bar displays the graph lines of
the left and right wheels in one graph. When the data is displayed in one graph, the [View] menu
changes to [Divide chart to left and right].
2 Maximum and Minimum Values of Hand Rim Input and Wheel Speed
This area displays the information of the left wheel unit in the upper part of the screen, and the
information of the right wheel unit in the lower part of the screen.
3 [Zoom] Icon
This icon zooms the graph in and out.
The graph is displayed at its minimum size by default. The size can be increased to twice the
minimum size.
You can zoom in and out by placing the cursor over the graph and using the mouse wheel.
4 [Redraw] Icon
Pressing this icon after changing the [Response Level (Balance Adjustment)] in the Driving Parameters
window calculates the response level and redraws the graph.
The same operation can be performed by selecting [Tool] > [Display (Redisplay) 50 sec. driving data]
from the menu bar.
5 [Wheelchair Path] Icon
This icon opens the Wheelchair Path window for displaying the path of the wheelchair.
Wheelchair Path Window"
The same operation can be performed by selecting [Tool] > [Display 50 sec. wheelchair path] from
the menu bar.
6 [Print] Icon
This icon opens the print preview of the diagnostic results.
Tool Window: Driving Measurement"
The same operation can be performed by selecting [File] > [Print] from the menu bar.
4 6
3
5
P.67 "5.9.2 Automated Diagnostics
59
2
P.60 "5.7