Table of Contents
Advertisement
Servo model
5 Operating Servo model
5.5
Driving Parameters Window
5.5.1
Tabs and Icons
1
1 [Basic information] Tab
Switches to the tab where the information of the electrically powered unit can be checked.
2 [Functional Parameters] Tab
Switches to the tab where changes can be made to the settings of functional parameters,
such as the auto power-off time, buzzer sound, and LED brightness.
3 [Mode 1] and [Mode 2] Tabs
These tabs allow you to set the parameters for the assist characteristics in [Mode 1] (when the
blue LED is lit up) and [Mode 2] (when the LED is off).
4 [Default] Icon
This icon displays the factory preset values on the screen.
parameters to default"
The same operation can be performed by selecting [Tool] > [Return screen parameters to
default] from the menu bar.
5 [Open] Icon
This icon opens the data files saved to the PC. P.48 "5.4.2 Recalling Setting Data"
The same operation can be performed by selecting [File] > [Open] from the menu bar.
6 [Read] Icon
This icon reads and displays the parameter values and basic information set in the wheelchair.
The same operation can be performed by selecting [Communication] > [Read driving
parameters from wheelchair] from the menu bar.
Depending on the software version of the connected wheelchair unit,
unsupported parameter settings may exist. In such a case, a confirmation
message may appear while settings are being read.
4
2
3
49
5
6
7
8
9
P.57 "5.5.9 Return screen
10
Advertisement
Table of Contents
