decon JW Smart Tune Operation Manual page 14

Joystick model Servo model
3 Common Operations
3.1.4 Connecting to the Wheelchair
1
Verify whether the wheelchair is in the following state:
• The parking brake is applied.
• There is sufficient battery power remaining.
• The power is ON.
2
Connect the communication cable (blue) to the Interface UNIT and to the
wheelchair.
The location of the cable port differs depending on the wheelchair model.
JWX-1 PLUS+/
Model
JUX PLUS+
Underside of
Location
propulsion controller
JWX-2 Battery Sheet
Integrated Type
Left side of battery sheet
14
JWX-2 Battery Sheet
Separated Type
Bottom part of battery
bag