Eco-Friendly Button; Figure 22: Eco-Friendly Button - Allied Telesis AT-GS950/28PS Installation Manual

Chapter 1: Overview

eco-Friendly Button

eco-Friendly
Button Operation
36
The eco-Friendly button serves multiple functions. See Figure 22 for its
location.
By pressing this button, you can:
Toggle the front panel LEDs on and off to conserve electricity

when you are not physically monitoring the switch.
Reboot your switch while maintaining the current configuration.

Reset your switch configuration to the factory default values.

eco-Friendly
Button
Note
The eco-Friendly button does not control the Power LED.
The button operates as follows:
Conserve energy: When you press the eco-Friendly button for 1 to

4 seconds, the front panel port LEDs are disabled. You may use
the button to turn off the LEDs when you are not monitoring the
switch. To turn the port LEDs on, press the eco-Friendly button for
1 to 4 seconds again. Toggling the LEDs does not affect the
network operations of the switch.
Reboot the switch: By pressing the button for 5 to 9 seconds, you

can initiate a software reboot of the switch.
Caution
The switch does not forward network traffic during the reboot
process. Some network traffic may be lost.
Figure 22. eco-Friendly Button

E113