Table of Contents
Advertisement
Chapter 2 Preparations
7.
Connect the required internal and external cables to the PCI board. Refer to the documentation that came
with the PCI board.
8.
Stick the terminal part of riser card and slot part on the mother board together and insert them in with
certainly.
9.
See Chapter 2 (1.26 Installing Top Cover) to attach the top cover of the server.
10. Please see Chapter 2 (2 Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
104
Note
Make sure that the edge of a PCI card bracket is seated into the fixed slot of
the riser card.
Depending on type of PCI cards, the terminal part of the PCI card may be too
large to fit in the connector.
If you have trouble installing the card, remove the card once and try again. If
you apply excessive pressure on the card, a PCI card or riser card might
break.
Tips
To connect a PCI card to the connector on motherboard with cable, connect a cable
to PCI card before installing riser card unit.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
