Table of Contents
Advertisement
Chapter 2 Preparations
4.
If expanding M.2 media, insert the edge part of M.2 media into the connector to connect and then fix them
on with 1 screw.
5.
Install the primary riser card.
Stick the terminal part of riser card and slot part on the mother board together and insert them in with
certainly.
6.
See Chapter 2 (1.26 Installing Top Cover) to attach the top cover of the server.
7.
Please see Chapter 2 (2 Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
86
Screw
M.2 media
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
