Installing Air Duct; Installing Support Bar; Installing Pci Riser Card Unit; Installing Top Cover - NEC Express5800/R120g-2M User Manual

Chapter 2 Preparations
1.22

Installing Air Duct

Install air duct in reverse order of removal. Refer to Chapter 2 (1.8 Removing Air Duct).
1.23

Installing Support Bar

Install support bar in reverse order of removal. Refer to Chapter 2 (1.7 Removing Support Bar).
1.24

Installing PCI Riser Card Unit

Install PCI riser card in reverse order of removal. Refer to Chapter 2 (1.6 Removing PCI Riser Card Unit).
1.25

Installing Top Cover

When all internal optional devices are installed, close the server with Top Cover.
1. Put the Top Cover straight on the server chassis so that it can be surely engaged with the chassis frame.
2. Slide the Top Cover toward the front of the server.
3. Tighten the fixing screw on rear of the server.
Important
Before removing the air duct, put cables aside. Otherwise, cables may be damaged if
they are pulled together with air duct.
Express5800/R120g-2M User's Guide
1. Installing Internal Optional Devices
111