Table of Contents
Advertisement
Chapter 2 Preparations
5.
Connect the required internal and external cables to the PCI board. Refer to the documentation that came
with the PCI board.
6.
See Chapter 2 (1.26 Installing Top Cover) to attach the top cover of the server.
7.
Please see Chapter 2 (2 Installation and Connection) in this manual to conduct installation and connection,
and turn the power supply ON.
Removal
To remove a PCI card, reverse the installation procedure.
If using the server with the PCI card removed, attach the blank cover that comes with the riser card unit.
Tips
To connect a PCI card to the connector on motherboard with cable, connect a cable
to PCI card before installing riser card unit.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Important
Re-attach the blank cover removed to maintain the internal cooling.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
107
Advertisement
Table of Contents
