Table of Contents
Advertisement
Chapter 2 Preparations
1.13
RAID controller (PCI Board Type-p)
RAID controller (PCI Board Type-p) is supported.
RAID controller N8103-195/196/201 are provided.
See the table1.12.2 Supported PCI cards and available slots (1) Standard riser card for performance features.
Installing RAID Controller
Please prepare the following before installing the option.
Parts included in the option kit
T-15 hexalobular driver
To install the components, follow these steps.
1.
Back up all data in the server.
2.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3.
Pick up the both end part of the primary riser card and lift them up to remove.
108
Important
The surface becomes hot after use so to avoid burns please allow the drive
and internal parts of the system to cool before touching.
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
