Table of Contents
Advertisement
Chapter 2 Preparations
Removing the PCIe SSD Drive
To remove the PCIe SSD drive, follow the procedure below. In addition, when discarding or transferring the
removed PCIe SSD drive, make sure to erase the data at your own risk in accordance with Chapter 1 (1. Transfer
and storage) of the "Maintenance Guide."
To remove the components, follow these steps.
No.
1
2
3
4
1.
Press the power switch.
The Do Not Remove switch illuminates and flashes.
2.
Wait until the flashing stops and the Do Not Remove switch is no longer illuminated.
Push the Do Not Remove switch and open the release lever.
3.
Remove the drive.
4.
Install the SFF (2.5-inch) drive blank in the drive bay unused.
Important
NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
Item
release lever
Activity ring LED
Do not remove switch / LED
Power switch
Note
Do not remove the PCIe SSD from the drive bay if the LED of the removal prohibit
switch is flashing. The flashing LED of the removal prohibit switch indicates that
the device is still in use. Removing the PCIe SSDSSD before completion of the
device signal and traffic flow may result in data loss.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
157
Advertisement
Table of Contents
