Table of Contents
Advertisement
Chapter 3 Setup
2.2
Starting SETUP Utility
Run POST following Chapter 3 (1.1.1 POST sequence).
After a while, the following message is displayed on the screen. (The on-screen message depends on your
environment.)
By pressing <F9> Key here, System Utility starts after POST is completed.
Furthermore, if an Admin Password has been set, a dialog box for password input will be displayed before
starting the system utility. Please enter the correct Admin Password.
You can enter password three times. If you enter wrong passwords three times in a row, further entry
of password is rejected.
To enter password again, reboot the server.
To save your change in System Utility and exit, press <F12> Key (F12: Save and Exit). In case you cancel your
change and exit, press <ESC> Key (Exit).
The default language of System Utility is English.
To put the setting back to the default values, press <F7> Key (F7: Load
Tips
Defaults).
The default value might be different from the factory setting.
iSCSI Configuration menu in Network Options menu cannot be put
back to the default values.
Express5800/R120h-1M User's Guide
2. Description on System Utility
191
Advertisement
Table of Contents
