Front View (Without Front Bezel) - NEC EXP804 User Manual

Chapter 1 General Description
4.2

Front View (Without Front Bezel)

・8x 2.5-inch drive model
(1)-1
(1)-2
・4x 3.5-inch drive model
(2)-1
(1) 2.5-inch Hard Disk Drive Bay
Bays for installing HDDs. The sequential
numbers indicate the corresponding slot
numbers. All bays include Dummy Trays.
(2) 3.5-inch Hard Disk Drive Bay
Bays for installing HDDs. The sequential
numbers indicate the corresponding slot
numbers. All bays include Dummy Trays.
(3) Pull-out Tab
A tab for showing the model number and serial
number of the server.
(4) Display Port Connector (Optional)
Not support
(5) USB2.0 connector (optional)
Connectors for connecting USB 2.0 interface devices.
(6) Optical disk drive (option)
Attaching the optical disk drive.
According to the order at the time of buying, one
of the following option drives is installed.
－ DVD-ROM drive
－ DVD Super MULTI drive
26
(3)
(1)-3 (1)-5
(1)-4 (1)-6
(3) (4)
(2)-2
Express5800/R120h-1M User's Guide
(4)
(6)
(1)-7 (1)-8
(5) (11) (12)
(2)-3 (2)-4
(7) POWER Switch/LED
A switch for turning on/off the server. Press once to
turn on the server. POWER LED lights when it is on.
Press it again to turn off the server. Hold down the
switch for four seconds or more to forcibly turn off the
server.
(8) STATUS LED
LEDs for showing the server status.
(9) UID (unit ID) switch/LED
The switch to turn ON/OFF unit ID LED or restart iLO.
When pressed once, the UID LED lights up, and it
turns ON. Press it again to turn it OFF.
For instructions on restarting iLO using the UID switch,
see iLO 5 User's Guide.
During executing commands from software, remote
management of iLO or firmware update, the UID LED
lights up or flashes if iLO is restarted via UID switch.
(10) LAN LINK/ACT LED
LEDs for showing the status of accessing to the
network.
(11) iLO service port USB connector
A USB connector used for connecting to iLO
such as for acquiring log. For details, refer to
iLO 5 User's Guide.
(12) USB3.0 connector (front)
Connectors for connecting USB 3.0 interface devices.
4. Names and Functions of Parts
(5)
(7)
(8)
(9)
(10)
(11) (12)
(10)
(9)
(8)
(7)