Show Qos Interface; Show Qos Cos-Map - TP-Link TL-SG3210 Cli Reference Manual

equ —— Equal-Mode. In this mode, all the queues occupy the bandwidth equally.
The weight value ratio of all the queues is 1:1:1:1.
Command Mode
Global Configuration Mode
Example
Specify the Schedule Mode as Weight Round Robin Mode:
TL-SG3424(config)# qos queue mode wrr

show qos interface

Description
The show qos interface command is used to display the configuration of QoS
based on port priority.
Syntax
show qos interface [ gigabitEthernet port | range gigabitEthernet port-list ]
Parameter
port
port-list —— The list of Ethernet ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of QoS for port 5:
TL-SG3424# show qos interface gigabitEthernet 1/0/5
Display the configuration of QoS for ports 1-4:
TL-SG3424# show qos interface range gigabitEthernet 1/0/1-4

show qos cos-map

Description
The show qos cos-map command is used to display the configuration of IEEE
802.1P Priority and the mapping relation between cos-id and tc-id.
Syntax
show qos cos-map
——
The Ethernet port number.
152