ADLINK Technology SMARC LEC-MTK-I1200 User Manual page 4

LEC-MTK-i1200 User's Guide
Safety Instructions
For user safety, please read and follow all Instructions, WARNINGs, CAUTIONs, and NOTEs marked in this manual and on the associated equipment before
handling/operating the equipment.
Read these safety instructions carefully.
Keep this manual for future reference.
•
Read the specifications section of this manual for detailed information on the operating environment of this equipment.
•
Turn off power and unplug any power cords/cables when installing/mounting or un-installing/removing equipment.
•
To avoid electrical shock and/or damage to equipment:
•
Keep equipment away from water or liquid sources;
•
Keep equipment away from high heat or high humidity;
•
Keep equipment properly ventilated (do not block or cover ventilation openings);
•
Make sure to use recommended voltage and power source settings;
•
Always install and operate equipment near an easily accessible electrical socket outlet;
•
Secure the power cord (do not place any object on/over the power cord);
•
Only install/attach and operate equipment on stable surfaces and/or recommended mountings;
•
If the equipment will not be used for long periods of time, turn off the power source and unplug the equipment.
•
Conventions
The following conventions may be used throughout this manual, denoting special levels of information
Note: This information adds clarity or specifics to text and illustrations.
Caution: This information indicates the possibility of minor physical injury, component damage, data loss, and/or program corruption.
Warning: This information warns of possible serious physical injury, component damage, data loss, and/or program corruption.
Page 4 copyright © 2023 ADLINK Technology Inc.
SGET SMARC Rev 2.1